Filter These Results

X Close Categories

BCategories

SClose Filters

SFilter These Results

$44.85

Our fold-down motorcycle flag pole comes with a chromed aluminum finish and an eagle topper. Rust proof and easy to maintain, all tools are included for an easy installation process (second picture shows all items included).  Fits 1/2" luggage rack tubing.  Pole length is 8.5"  and the total length (including base) is 14.5".  Compatible with our motorcycle flags sized 5.5" x 8.5" and 8.5" x 12.5" sold separately. Third image shows the pole with our 5.5" x 8.5" USA Motorcycle Flag (not included).

Size: 
8.5"
$2.25

Need to replace a broken ring?  Or just looking to transform your banner pole (or homemade pole) to accommodate grommeted flags?  These clear rings make it easy to attach grommets to house poles. Made of clear, PVC these rings are for use with poles 1 1/4" in diameter.  Rings are sold as pairs (Quantity 1 = 1 pair or two rings).

$2.00

Need to replace a broken ring?  Or just looking to transform your banner pole (or homemade pole) to accommodate grommeted flags?  These clear rings make it easy to attach grommets to house poles. Made of clear, PVC these rings are for use with poles 1" in diameter.  Rings are sold as pairs (Quantity 1 = 1 pair or two rings).

$1.75

Need to replace a broken ring?  Or just looking to transform your banner pole (or homemade pole) to accommodate grommeted flags?  These clear rings make it easy to attach grommets to house poles. Made of clear, PVC these rings are for use with poles 3/4" in diameter.  Rings are sold as pairs (Quantity 1 = 1 pair or two rings).

$4.50

An inexpensive alternative to the spinning pole these rotating rings work with any housepole 1 1/4" in diameter.  They are also great for flags with D-Rings or extra large grommets (where the standard stationary rings do not fit).  Made of white PVC with metal hooks.  Rings are sold as pairs (Quantity 1 = 1 pair or two rings).

$2.60

An inexpensive alternative to the spinning pole these rotating rings work with any housepole 1" in diameter.  They are also great for flags with D-Rings or extra large grommets (where the standard stationary rings do not fit).  Made of white PVC with metal hooks.  Rings are sold as pairs (Quantity 1 = 1 pair or two rings).

$179.00

Solid oak case holds a standard 5' x 9.5'internment flag. May be wall mounted or free standing. Removable back panel, and glass face. Made in the USA. Flags sold separately.

$51.90

Solid brass, polished and lacquered, 9.25" long

Size: 
9.25"
$27.00

Lightweight and compact for easy mobility, made of strong polymer plastic for durability, an extra long neck for stability, this portable stand is nothing if not versatile.  Dark brown to compliment almost any decor, and 3 adaptor sleeves to accomodate poles 1", 1 1/8" and 1 1/4" in diameter.  

 

Total Weight: 1.5 lbs

Size: 
24"X5.75"X2.125" (closed)
$3.90

No tools required! Great for mailboxes, railings, posts, columns and more. Super-strong adhesive replaces screws and firmly adheres to metal, plastic, wood, brick and other surfaces. Accepts staffs 5/16 in. or smaller making it a great size for small flags, pennants, pin-wheels, spinners, and windsocks. Measures 3/4 x 4 in. and features safety DOT reflector. Not recommended for use on delicate surfaces or wallpaper. Adhesive is semi-permanent; to remove cut with knife, thin wire or floss. Made in the USA.

$22.90

For carrying or storing mounted flag sets.  Durable and lightweight waterproof material protects flag sets.  Features simple tie tapes.  Measures 8"x 72" in size.

$16.85

1/4" White Braided Polypropylene rope (halyard) in a handy replacement size for 20' poles.  The rope itself measures around 38' in length.

$0.30

This black plastic staff measures 10" in length and 3/16" in diameter with a gilded spear point.  Designed as a replacement staff for our 4"x6" stick flags, it can be great to turn your mis-matched set into a matching set, or it can be used if you need to create a stick flag of your own design.

$19.10

Gold-plated Styrene plastic. Lightweight and durable. 8.25" long

Size: 
8.25"
$4.00

Designed to last, our heavy-duty Brass Swivel Snaps measure 3.5” in length and are great for use on any in-ground pole.  Sold Individually. 

$2.40

Nylon snaps are a great durable and economical choice for any outdoor in-ground flag pole. They are quiet and non-marking.  The mounting eye fits halyard up to 5/16 of an inch thick.  These Snap Hooks are sold as pairs (Quantity 1 = 1 pair or two rings).

$2.90

Nylon snaps are a great durable and economical choice for any outdoor in-ground flag pole. Featuring an easy off, easy on design these snaps will not scratch the flagpole and are suitable for flag sizes from 2x3 feet up to 6x10 feet. The mounting eye fits halyard up to 3/8 of an inch thick.

$69.95

No special tools or wiring required-easy to install.  Designed for use with select in-ground poles measuring 15-25'.  The Solar Panels collect energy from the sun during the day and illuminate your flag at night.  This solar light measures approximately 8"x2" in size. . The light source is super bright LED's which can work up to eight hours at night after a full sunny day of charging, three self charging batteries are included.

$19.95

The solar light is designed to work with small 5-8 foot outdoor flagpoles. It measures less than 5 1/2 inches in diameter and weighs only 5 ounces. Included with the solar light are three angle adjustable adaptors to accomodate a variety of one inch diameter poles, including spinning poles. The light source is super bright LED's which can work up to eight hours at night after a full sunny day of charging. The solar light is easy to install and comes with self charging batteries.

$33.00

Our Commodore Stand is made from abs plastic with a traditional gilt finish.  This base comes un-weighted (but sand can be added if additional weight is needed) with a base diameter of 11.5", inserts are included to accomodate poles from 1"-1 1/4" in diameter.

Total weight: 2 lbs.

$153.00

When only the best will do.  This elegant solid mahogany stand is buffed to a gleaming finish and trimmed with polished brass fittings.  Bore accepts poles 1 1/4" in diameter.

Total weight: 9 lbs.

$247.00

When only the best will do.  This elegant solid mahogany stand is buffed to a gleaming finish and trimmed with polished brass fittings.  Bore holes accept poles 1 1/4" in diameter.  

Total weight: 10 lbs.

$228.00

When only the best will do.  This elegant solid mahogany stand is buffed to a gleaming finish and trimmed with polished brass fittings.  Bore holes accept poles 1 1/4" in diameter.  

Total weight: 9.5 lbs.

$42.00

Solid Brass, polished and lacquered. 8.75" long

Size: 
8.75"
$3.00

This stamped steel wall bracket fits our 1" diameter flag poles.

Size: 
1"
$3.00

This stamped steel wall bracket fits our 3/4" diameter flag poles.

Size: 
3/4"
$7.50

Black matte finish on this sold wood base looks great with any stick flag.  Designed for stick flags with a 3/8" staff, this base measures 4" in diameter.

$0.75

Use this base to proudly display your 4" x 6" stick flag. Designed to hold stick flags made by Annin, the leading flag maker in America.

$0.75

Use this base to proudly display your 4" x 6" stick flags.  Designed to hold stick flags made by Annin, the leading flag maker in America.

$1.00

Use this base to proudly display your 4" x 6" stick flags.  Designed to hold stick flags made by Annin, the leading flag maker in America.

Pages